Page d'accueil Catalogue des Produits Enduits Décoratifs Elf Decor™ Elfloor Finish

01 / 01

Decorative interior floor coating based on quartz dust and two-component polyurethane binder. Component A - 15 kg decorative coating; component B - 0.3 kg hardener

Base:

Besoin de conseils ?

Application:

interiors

Composé:

quartz dust, dispersions of acrylic copolymers

Consommation:

0,3-0,4 kg/m²

+ Caractéristiques supplémentaires

ELFLOOR FINISH is a decorative coating that can be used on both horizontal and vertical surfaces. It is used to create the effect of continuous decor, rolling down from walls to floor. The use of quartz dust and a polyurethane binder makes this coating particularly durable and wear-resistant.

In case of decorating furniture or countertops, the base must be solid, firmly assembled and not have moving cracks or crevices.

Type: special 2-component water-based polyurethane plaster for flooring

Composition: quartz dust, special dispersions of acrylic copolymers, mineral fillers, refining additives.

Gloss level: matt

Particularités

The material has a special rheology
Especially durable and wear-resistant coating
Can be applied on both horizontal and vertical surfaces

Acryl copolymers

Interior

Floor

Suitable for flooring

High strength

If ELFLOOR FINISH is used for arranging flooring, this material must be applied in a system with ELFLOOR BASE.

ELFLOOR FINISH can be used as a quartz plaster for decorating walls and ceilings.

To the previously tinted material, add the required amount of ELFLOOR HARDENER Gloss in a 20: 1 ratio by weight. Then mix thoroughly with a mixer. Pot life of the finished mixture is 4 hours.

Apply the prepared mixture with a plastic or metal trowel in an even, thin layer. In case of prolonged smoothing of the drying material with a metal trowel, the appearance of "blackening" of the coating is possible. For an optimal aesthetic finishing effect, it is recommended to apply the product in an arcuate, curved motion, constantly changing the direction of movement of the trowel.

After the coating is completely dry and before applying subsequent layers, the coating must be treated with 120 and 220 grit sandpaper, and then dedusted.

Produits connexes

Agents spéciaux ELFLOOR HARDENER Gloss Water dispersion aliphatic polyisocyanate based on a combination of HDI and IPDI. It is used as a hardener for water-based 2-component polyurethane varnishes and coatings.

Varnish Protect 2K Gloss Two-component water-based deep matt polyurethane varnish. Component A - 2.5 kg varnish; component B - 0.5 kg hardener

Enduits Décoratifs Elf Decor™ Elfloor Base Decorative interior floor coating based on quartz sand and two-component polyurethane binder. Component A - 15 kg decorative coating; component B - 0.3 kg hardener

Où acheter

Cliquez pour afficher la carte

Obtenez l'adresse de votre revendeur le plus proche

Votre prenom*

Ville*

Email ou téléphone*

J'accepte les conditions de traitement des données personnelles

S'il n'y a pas de showroom dans votre ville, nous vous aiderons à acheter nos produits auprès de nos revendeurs, à l'endroit le plus pratique pour vous.