Exterior Paint FACADE

The surface must be strong, clean, dry and suitable for processing. Perishable old coatings, dirt and deposits should be carefully removed. Fresh cement plaster must withstand at least 28 days. Sew cracks on the surface and fill with facade putty. Surfaces should be treated with a deep penetrating Elf™ primer. Sand and dust off strong alkyd and oil coatings. Affected areas should be cleaned with special tools and treated with D 07 Fungicide primer according to the instructions.

Stir thoroughly before use. Apply to the surface with a brush, roller or spray (including airless method) in 2 layers.

1st layer - it is recommended to dilute the paint with up to 10% water.

2nd layer - it is recommended not to dilute the paint.

When applying by airless spray, use a nozzle with a diameter of 0.45-0.66 mm and a pressure of 160-180 bar. When applying by air spraying, dilute with water to working density and use a nozzle of 2 mm. Drying time of each layer 1-2 h, complete drying 24 h, at the temperature +20°C and relative humidity 60%. In other conditions, the drying time may change, with decreasing temperature, the time will increase.