Itaka

Apply QUARTZ PRIMER to the prepared surface (fig. 1). Wait until it dries completely. Thoroughly stir the white ITAKA base and apply it using a plastic or metal plastering trowel to the wall (fig. 2).

The thickness of the layer depends on the selected texture. When applying the material do not attempt to achieve a smooth surface. On the contrary, it is advisable to emphasize the relief: unevenness and roughnesses only will give charm to your walls. Wait for the complete drying of the surface (24 hours). Treat the base layer using a sandpaper and prime it with OptiGrund D11 ELF™ primer. 

Due to its formula and reinforcing fibers ITAKA protects walls from microcracks. Before applying DECOR WAX topcoat add the selected dye or use computer system tinting and mix it thoroughly. 

Apply wax to the base layer using a brush or roller (fig. 3), then grind it with a paint glove, sponge or spatula until the desired effect is obtained (fig. 4). 

To obtain modern coatings, you can use AZURE varnish-chameleons or SPECIAL WAX metallized waxes. VARNISH PROTECT varnishes are recommended to enhance protection. It is recommended to ventilate the room for faster drying of the varnish after the work is finished.